HID桌面卡發卡器
一、HID卡發卡器介紹：
HID發卡器數據接收芯片和鍵盤接口控制芯片均采用Microchip 單片機，具有抗干擾能力好、電路簡單、可靠性高的特點。HID發卡器的優點是無需外加電源，數據輸出格式可以仿真鍵盤數據輸出，應用軟件無需做額外的接口驅動程序開發，凡是使用鍵盤輸入數據的地方均可使用該設備。主要應用在HID門禁HID考勤HID售飯HID圖書管理和HID一卡通系統中。
二、HID發卡器卡號顯示
HID讀卡器 HEX
HID讀卡器 卡片印刷
HID讀卡器 ABA（8H）格式
HID讀卡器 Wiegand26(DEC)
HID讀卡器 W32/W34(DEC)
HID讀卡器 RISG30BI
三、HID發卡器技術特征:
HID發卡器USB 2.0 接口/RS232 可選
HID發卡器工作頻率 125K
HID發卡器工作電壓 DC5V
HID發卡器讀卡距離 5~8cm
HID發卡器環境溫度 -20℃+60℃ |
 |
四、HID發卡器性能指標：
1、HID讀卡器供電方式： USB取電，5V。
2、HID讀卡器工作電流：<70mA
3、HID讀卡器讀卡距離：4-8 cm（本機天線裝在底殼）
4、HID讀卡器刷卡反應時間：小于100ms
5、HID讀卡器輸出數據：用戶可根據軟件設置選擇多種方式
6、HID讀卡器通訊接口：串口
7、HID讀卡器顏色: 黑色,白色
五、HID發卡器使用方法：
HID發卡器可以單張取號，也可以作為鍵盤輸入功能。
HID發卡器可以批量取號，批量取號時，顯示在軟件界面的右力顯示框內，并可以保存。
HID發卡器當作鍵盤輸入時，“訪真鍵盤輸入”復選框打勾選中使之出現后，即在任何應用軟件中，將讀卡器讀到的卡號按使用者選擇的形式，如“WEG26”等等輸入到光標所在位置之后，同時蜂鳴器發聲，Led指示燈紅綠閃一下。HID發卡器的模擬鍵盤輸入不影響鍵盤正常操作。
六、HID發卡器二次開發
HID卡發卡器為用戶提供完整便捷的開發環境
HID卡發卡器波特率 9600
HID卡發卡器多種數據格式
HID卡發卡器數據頭 0x02
HID卡發卡器數據長度 0x0d
HID卡發卡器異或校驗 BCC
HID卡發卡器數據長度 snr
HID卡發卡器數據結尾 0x03
IC卡復制IC卡解密IC卡復制機IC卡解密機門禁IC卡復制門禁IC卡解密停車IC卡解密停車IC卡復制IC卡電梯卡解密IC卡電梯卡復制機器IC卡酒店IC卡解密別墅卡解密 |
|
|
HID Card issuing machine
1、HID card issuing device description
HID card data receiver chip and keyboard device interface control chip are used Microchip microcontroller，With a good anti-jamming capability、Circuit is simple、High reliability。HID card device has the advantage of no external power supply，Data output format can simulate the keyboard data output，Application software interface without the need to introduce additional driver development，Those who use the keyboard to input data can be used where the device。Primarily used in HID access control HID Attendance HID Meal sales library management and HID Card HID System。
2、HID card dispenser card number displayed
HID Card Reader HEX
HID Card Reader Card Printing
HID CARD READER ABA（8H）format
HID CARD READER Wiegand26(DEC)
HID CARD READER W32/W34(DEC)
HID CARD READER RISG30BIT
3、Technical characteristics of HID card
HID Card issuing machine USB 2.0 interface / RS232 optional
HID Card issuing machine Frequency 125K
HID Card issuing machine Voltage DC5V
HID Card issuing machine Read Range 5~8cm
HID Card issuing machine Temperature -20℃+60℃
4、HID card Performance Indicators
HID Card Reader Power Supply USB to take power：5V。
HID Card Reader Power Supply Current：<70mA
HID Card Reader Power SupplyRead Range：4-8 cm
HID Card Reader Power SupplyReaction time credit card：<100ms
HID Card Reader Power SupplyOutput ：Users can select a variety of ways according to the software settings
HID Card Reader Power Supply Communication Interface：232
HID Card Reader Power SupplyColor：Black, White
5、HID card uses the method of
HID card device can take No. leaflets，Also can be used as keyboard input function。
HID card device ID can be obtained bulk，Batch number obtained when the，Displayed in the software interface of the right edge display box，And can be saved。
HID card as a keyboard input device，“Visit True keyboard input” Tick the check box is selected so that the emergence of，That in any application software，Reader to read your card number will be chosen by the user form，如“WEG26” Input to the cursor location, etc. After the，At the same time buzzer sound，Led lights flash red and green look。HID card analog keyboard input does not affect the normal operation of the keyboard。
6、Secondary development of HID card device
HID card issuing device to provide users with a complete development environment and convenient
HID Card issuing machineBaud 9600
HID Card issuing machineA variety of data formats
HID Card issuing machineHeader 0x02
HID Card issuing machineData length 0x0d
HID Card issuing machineXOR Checksum BCC
HID Card issuing machineData length snr
HID Card issuing machineData at the end of 0x03 |
